Hi there,
I recently bought a Retrode 2. Unfortunately, I am not able to dump files:
NBA Jam TE -> no success
Starwing -> no success
Super Mario Kart -> no success
Sim City -> no success
...
If I dump the files and try to start them using SNES9x, I get a "bad checksum" error and the screen stays black.
I use "forcesystem: snes", the rest of the configuration parameters are unchanged.
The only dump I managed to make was Super Mario World.
Any advice?
Try using rubbing alcohol and Q-Tips to clean your games, then let them air out for a few minutes and try again.
Thanks for your reply. I already cleaned my games using Q-Tips. Will clean them once more.
Why do games have to be cleanded when using Retrode 2 (i can use them in my original SNES without problems)?
Alternatively you may refer to my cleaning guide found in my signature.
Quote from: retrosnes on 07/Feb/2016 03:47:17 PM
Any advice?
Yes, please tell us exactly what you do and what you get. Without the [forceSystem] setting, are there any ROM files displayed or only the CFG? Can you confirm that the internal voltage selector switch is at 5V? If there is a cart detected without [forceSystem], please send dumps to support at <productname> dot org
Retrode is set to 5V.
I cleaned all games a second time using a Q-Tip and 100% alcohol (should I go for a "mecanical" cleaning?).
When I start my computer with the Retrode already connected I cannot get past the post screen. Is this behaviour normal?
So here is what I did (forcesystem: snes):
Variant 1:
1. Start computer (Retrode not connected)
2. After start up, I connect the Retrode to my computer, an explorer window opens automatically
3. I insert a game, hit refresh in explorer
4. I can see 2 files (plus retrode.cfg BUT: sometimes the name is right, sometimes not, sometimes only one file although with the same game I had two files before, the size of the files may differ when using the same game)
5. I double click the *.sfc file
6. Bad checksum, black screen
Variatiant 2:
1. Start computer (Retrode not connected)
2. Insert game
3. Connect to computer
4. Computer does not regocnize my Retrode (the green light on the Retrode lights up but nothing happens, even not after 10 mins or so)
5 When I remove the game frome the Retrode, the light still lights up, nothing happens
If I use forcesystem:auto:
Variant 1: no success at all, after inserting the game, the green light lights up bu nothing happens or I see a file named "2600.cartrige.a26"
Variant 2: green light lights up, nothing happens.
Hmm. Sounds like either incomplete firmware flash or faulty hardware. Please go to retrode.org/firmware and see if updating to latest beta helps.
Thanks for your quick reply.
I found .18d on my retrode. I flashed .18c (.18d is beta only).
No difference. Tomorrow I will try to flash .18d-beta3
What is your OS? I found under Windows 7 that current firmware versions generate errors in the event log, perhaps caused by a bug in the latest LUFA that was added to the firmware in 0.18c. I don't get errors on 0.17g, so I continue to use that firmware. Perhaps it would work for you, too.
I tried using WindowsXP and WIndows2000 (my retro gaming rigs).
Which event.log are you talking about? W7 event log? Where can I find it?
Tried some other firmware:
18a -> no difference
17g -> no difference
When I use 18a or 17g plus forcesystem:auto Retrode detects only one file called "GenericRomInSnesSlot.dat". Did this happen to anyone else?
Under the Windows 7 Start Menu, just type "event" and you'll get a search result for the Event Viewer. Firmware 0.18d beta generated Event ID 11, Source: Disk errors every time I plugged in the Retrode. See here (http://forum.retrode.org/index.php/topic,293.msg1947.html#msg1947). Perhaps your event log will reveal whether the Retrode is generating any errors on your system.